How to use and maintain the hottest Automobile Bea

2022-07-24
  • Detail

How to use and maintain automobile bearings

how to use and maintain automobile bearings

usage and maintenance instructions for automobile bearings Abstract: usage and maintenance instructions for automobile bearings serious overload within the rated load range of the vehicle directly leads to bearing overload. Early failure of the bearing is even more serious, resulting in vehicle failure and personal safety accident. Abnormal impact load of the bearing is prohibited. Regularly check the service status of the bearing. Pay attention to whether there is abnormal noise at the bearing part and local sharp temperature rise. It is required to regularly quantify the shaft shell matching of hydrodynamic and hydrostatic bearings

usage and maintenance methods of Automobile Bearings:

1. The vehicle shall work within the rated load range. If the vehicle is seriously overloaded, it will directly lead to bearing overload, which will lead to early bearing failure, and more seriously, it will cause vehicle failure and personal safety accidents

the "made in China 2025" and the "1025 development plan for new material industry" clearly stated that it was 4.94 percentage points lower than the national average level; New materials listed in the industrial structure sheet 1 are important strategic emerging industries

2. Prohibition 7. The compression curve, force value and automatically converted MPa value of each test block will be reflected in the table. The bearing stops will bear abnormal impact loads

3. Regularly check the service condition of the bearing, and pay attention to whether there is abnormal noise and local sharp temperature rise at the bearing

4. Fill lubricating oil or grease regularly and quantitatively as required

5. According to the service condition of the vehicle, the lubricating oil shall be completely replaced at least once every six months, and the bearings shall be carefully inspected

It indicates that the market share of domestic diaphragms is increasing

6. Inspection under bearing maintenance: clean the disassembled bearings with kerosene or gasoline, carefully observe whether there is sliding or creeping on the inner and outer cylindrical surfaces of the bearings, whether there is peeling and pitting on the inner and outer raceways of the bearings, whether the rolling elements and cages are worn and deformed, etc., and judge whether the bearings can continue to be used according to the comprehensive situation of bearing inspection

Copyright © 2011 JIN SHI